Loading
Channel: @JoshuaBardwell
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
Get your FPV Drone DIY Kit at GetFPV:
Suggested parts, tools, and other accessories are linked on the GetFPV product page.
Thingiverse album of 3D prints for this frame:
All videos in this playlist are at: https://www.youtube.com/playlist?list=PLwoDb7WF6c8neIAQBkchfiXf-C8KbzG5M
--- TABLE OF CONTENTS ---
00:00:00 - You're going to build an FPV drone! 00:00:53 - What parts are included? 00:04:36 - Assemble the bottom plate and arms 00:08:57 - You probably should use loc-tite (but I'm not) 00:10:16 - Install the motors on the arms 00:11:41 - Install the ESC 00:13:42 - Solder the motor wires to the ESC
My "how to solder" tutorial - https://youtu.be/GoPT69y98pY
00:19:21 - Solder the XT60 connector 00:25:54 - Mount the FC on top of the ESC
How do I know which wires go where on the FC? - https://youtu.be/APfDzb6fIoY
00:32:29 - ANALOG ONLY: Install the vTX 00:38:05 - DJI ONLY: Solder and prepare the vTX 00:44:07 - DJI ONLY: Mount the Vista and camera in the frame 00:51:56 - ANALOG ONLY: Solder the camera to the FC 00:54:47 - Install the ELRS receiver 01:01:20 - Solder the capacitor 01:03:40 - Next up: smoke-check and configure!