Video: Belt Sander Grinder DIY. I made it Using Only Simple Tools.

Hello everyone🙌.

I built this belt sander using a simple power tool and junk I found in the workshop. I'm sure you can do the same, or even better!

Work process:

To make a drive roller without using a lathe, I took plywood and a jigsaw.

The plywood is strong enough and is perfect as a drive roller.

I cut the circles of the desired diameter with a jigsaw and glued them together with wood glue. For greater reliability, I pulled these circles with two long self-tapping screws.

Then I fixed this workpiece on the motor shaft and using an angle grinder and a chisel, gave a round shape to my workpiece.

I made the driven roller using several bearings and a bolt.

I made the frame of the grinder from a sheet of iron 6 mm thick.

I showed the whole process in the video, I think you will like it!

FRIENDS ATTENTION!

I started a new channel on YouTube.

This channel is all about cooking!

Mostly male food! Everything we like - more meat, and without unnecessary troubles!

Please support my endeavor! Follow the link, look at a couple of recipes, I'm sure you'll like it!

Thank you!

https://www.youtube.com/channel/UCjWqeIua4jzuPkXP2WBAAuA

#BeltSander

#DIYProject

#DIY